Espansione digitale dell'arcata mascellare

Ciao a tutti

In questo primo post vi mostro come eseguire un'espansione digitale mascellare attraverso l'utilizzo del programma gratuito Meshmixer.


Commenti

Posta un commento

Post popolari in questo blog

How to add your logo to a scan in Meshmixer

Immagine
In this post I'll show you the step by step procedure to add your personal logo to a digital scan in Meshmixer. 1) Generate a 500x500 px black box in Paint or other imaging software 2) Add your personal logo 3) Open Meshmixer and import your scan 4) Select the surface where you want to put your logo 5) Click on Edit >  Remesh or press R on the keyboard 6) Set these values and then click on accept As you can see the result is an high density mesh 7) Go into Sculpt mode > Select Surface > Stencils > Click on the big plus button 8) Select your logo  9) Then click again on Stencils and select your logo 10) Set these values and click on the surface to apply the logo As you can see the result is great , especially if you generate an high contrast logo. If you want you can also apply a different kind of logo, with a solid base extruded and an intruded text. The step by step is the same, except for the l
Continua a leggere

How to make a scan solid and how accurate is this process

Immagine
In this post we will see how to keep the quality of the mesh during the solid transformation of the scan in Meshmixer and how precise is this process. 1) First of all add a base to the arch scan: 2) Then select  make solid in the Edit section:  3) Wait for the preview loading and subsequently set Accurate for  Solid Type  and the maximum value for  Solid Accuracy  and  Mesh Density . Click on the Update button and the accept : The transformation process is complete. To prove the accuracy of the transformation, look at this series of images (the measurement is done by selecting the points by hand): Lenght A: 17,376 mm Lenght B: 17,301 mm Lenght A: 9,8342 mm Lenght B: 9,7897 mm Lenght A: 63,311 mm Lenght B: 63,213 mm From this comparison it is possible to notice how extremely minimal is the difference in terms of dimensions and also that the shape of the solid is perfectly corresponding to the original scan.
Continua a leggere